
Foam Insulation
Foam Roofings
Poly-Sil
2200 Polyurea
Silver Bullet
Metal Roof
Restoration
Taylor's
Industrial Coatings Inc., 108 Dr. JA Wiltshire Ave. E, Lake Wales,
Florida 33853
Contact us at: (863) 676-5093 1-800-932-3049 FAX (863)-676-9573
PROTECTION
The multifaceted benefits and extended life span of SPF are now
being fully realized in the construction industry. In
use for more than 30 years, SPF is proving its dominance against
other insulators in the market. It is more durable even
in the toughest elements and more effective in protecting
against the movement of air, heat and moisture. This minimizes
dew point problems and condensation within the building envelope,
which is the main cause of building deterioration over time.
BUILDING ENVELOPE A
building envelope is a system of construction components that
provides protection against the movement of air, moisture and
heat either in or out of the structure.
DURABILITY
To date, there is no known end to SPFs life-cycle. In buildings
where it was first used over 30 years ago, SPF has shown little
if any deterioration. It doesnt sag, settle or shrink,
and generally requires no longterm maintenance.
RESISTANCE
This durability remains even when SPF faces thetoughest environmental
elements. The way in which it grips to the wall surface keeps
it intact in strong winds and capable of maintaining its resistance
to air and water penetration. It is even known to add strength
to the buildings structure.
EFFICIENCY
With the highest R-value of any insulation material, SPF not
only reduces but eliminates drafts and heat loss,
making it the most cost efficient insulation available. This
means reduced consumption of fossil fuels and fewer green house
gases. As an all-in-one air barrier, insulator and moisture barrier,
SPF can reduce costs up front by reducing construction fees.
THE MULTIFACETED BENEFITS OF ROOF-TEK'S® POLYURETHANE FOAM
VALUE
Highest R value of any insulation material
Eliminates drafts
Better climate control
Lower construction costs
Reduces fossil fuel consumption
Little or no long-term maintenance
Increased life of the building
COMFORT AND HEALTH
Eliminates drafts and heat loss
Improves air quality
Protects against noise pollution
Resistant to mold and mildew
CONSTRUCTION
Lightweight
Reduced load on structural members
Allows for design options such as thinner walls
Identified as a green or sustainable
building material
Meets insulation requirements for new construction and
building improvements
USES
Commercial and residential
Cavity wall
Precast concrete wall
Curtain wall
Roof
Sprayed Polyurethane Foam (SPF) should
be professionally installed by an authorized application specialist.
To learn more about the benefits of sprayed polyurethane foam
or to speak to an applications specialist, contact Taylor's Industrial
Coatings Inc. at: (863) 676-5093 1-800-932-3049 FAX (863)-676-9573
|
PHYSICAL PROPERTIES |
|
Density |
2.0 pcf |
|
Compressive Strength |
28lbs./sq. in. |
|
K Factor Aged |
0.15 |
|
R Value Aged |
6.6 |
|
Tensile Strength |
45lbs./sq.in. |
|
Closed Cell |
>90% |
|
Water Permeance |
1.4 perm/in. |
*This foam is rated CLASS I according to ASTM E-84

According to the National Association of Home Builders Research
Center, a structure braced with SPF-filled walls suffers less
damage and permanent deformation of wall elements during a hurricane.

Comparisons have shown up to 40% in energy savings by using SPF
over commonly specified insulation materials.
 |